Description
High-quality flexible adhesive for thermal insulation systems (styrofoam, mesh, mineral wool)
It is particularly suitable for the final layer of adhesive, or impressing of the mesh.
Application: the adhesive is applied linearly along the edges of styrofoam panels and transversally at two places in the thickness and width of the strip up to 3 cm. Thus prepared panel fix on the wall, after drying, the anchors are installed, and then the adhesive layer is applied in the thickness of 2-3 mm on the entire surface of the styrofoam panel. Impressing of the fibre glass mesh with an overlap of 10 mm is done immediately after applying the adhesive.
Work conditions: temperature from 5-30°C. Avoid working in direct sunlight, rain and frost.
Consumption: 7.0 – 9.0 kg/m².
Storage: in a dry and ventilated room, on a wooden surface in the original packaging, at temperature over 5°C.
Packing: kraft bags of 25 kg.
